D-Link DWS-3160-24TC - Page 932

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
928
DWS-3160-24PC:admin#config wireless wids_security rogue_det_trap_interval 3600
Command: config wireless wids_security rogue_det_trap_interval 3600
Success.
DWS-3160-24PC:admin#
96-27 config wireless wids_security standalone_cfg_invalid
Description
This command is used to manage standalone APs when operating with an unexpected channel,
SSID, security, or WIDS mode or not.
Format
config wireless wids_security standalone_cfg_invalid [enable | disable]
Parameters
enable
- Specifies to manage standalone APs when operating with an unexpected channel,
SSID, security, or WIDS mode. This is the default option.
disable - Specifies not to manage standalone APs when operating with an unexpected channel,
SSID, security, or WIDS mode
Restrictions
Only Administrators can issue this command.
Example
To manage standalone APs when operating with an unexpected channel, SSID, security, or WIDS
mode:
DWS-3160-24PC:admin#config wireless wids_security standalone_cfg_invalid enable
Command: config wireless wids_security standalone_cfg_invalid enable
Success.
DWS-3160-24PC:admin#
96-28 config wireless wids_security unknown_ap_managed_ssid
Description
This command is used to manage managed SSIDs received from unknown rogue APs or not.
Format
config wireless wids_security unknown_ap_managed_ssid [enable | disable]
Parameters
enable - Specifies to manage managed SSIDs received from unknown rogue APs. This is the