Web Operations 185
Select the flow use policy and data flow upper limit for 3G/4G module.
View the currently used flow by 3G/4G module.
Click Save. Step 4
After access is succeeded, the obtained IP address is displayed.
5.3.2.7.2 Configuring Wi-Fi Network
You can connect the Device to network through Wi-Fi. Then connect PC to the same network to
login web interface of Device.
This function is supported on the Device with Wi-Fi module.
Preparation
Make sure the Device is connected to Wi-Fi.
Procedure
Select SETUP > NETWORK > WIFI. Step 1
The WIFI interface is displayed.
In the Working Mode Selection list, select Wifi. Step 2
The Wi-Fi interface is displayed. See Figure 5-70.
Wi-Fi
Figure 5-70
Connect to Wi-Fi. Step 3
Auto search
1) Click Search SSID.
To Next Page
Loading...
