Local Configurations 72
Select the Health Enable check box, and then enter the interval. The
system can send a test email to check the connection according to the
interval.
The value ranges from 30 minutes to 1440 minutes.
Click Test to test the email sending and receiving function. If the
configuration is correct, the receiver’s email account will receive the test
email. Before testing, click Save to save the settings.
Table 4-26 provides configuration instructions of common email boxes for your
reference.
Table 4-26 Common mailbox configuration parameters
Do not select NONE for encrypt
type.
The mailbox must have applied
SMTP service.
The password must be an
“authorized password”. Both the QQ
login password and email login
password are invalid.
Obtain the authorized password when
your mailbox is applying for SMTP
service.
The mailbox must have applied
SMTP service.
The password must be an
“authorized password”. The email
login password is invalid.
Obtain the authorized password when
your mailbox is applying for SMTP
service.
The mailbox must have applied SMTP
service.
The mailbox must have applied SMTP
service.
3) Click OK.
Select the EMAIL check box, and then click Save. Step 4
The NETWORK interface is displayed.
Click OK. Step 5
To Next Page
Loading...
