Back
No. of Zones
4
No. of Constants
1
Zone Setup
AC Unit Setup
Pair Wireless Device
iSave
Options
WiFi Bridge Config
Change Password *******
Myzone Device List
System Configuration
64
Number of
Constants
Number of Constants
Set the number of constants
that are being used in
the system.
To do this click on “Number
of Constants”, delete the
factory default setting of
1 and enter in the correct
number of constants being
used in the application.
NOTE: Some form of constant
control must be designed,
installed and configured
when using a Myzone 3
system. Failure to do so can
result in damage to the air
conditioning unit and its
associated componentry.
For more information on
Constant Zones, please refer
to the design considerations
section within the
Installation Manual.
To Next Page
Loading...
