Myzone 3 12:00PM 01 Jan 2021
SYSTEM ZONES AC UNIT OPTIONS
Unit Auto Off
Use In-duct Energy
Auto Mode Dead Band 1.50
AC Settings
Fault History
Master/Slave
AC Unit Make Auto Detect AC Unit
Fujitsu
Master/Slave Settings
Myzone
On/Off
Other
Mode
Fan
Setpoint
96
A/C Unit
Configuration
Master/Slave
Use these settings to
adjust Master/Slave control
configurations with Myzone and
another control.
E.g. selecting both Myzone and
Other for ON/OFF will allow the
unit to be turned ON/OFF from
both the Myzone and
other controller.
Note:
• This is an Advanced setting and
should only be attempted by suitably
qualified Myzone technicians.
• These settings will only work with
certain makes and models of A/C
units. Contact Reece to check if your
system is suitable.
• The A/C system controls may require
additional PCML5Bs, Master/Slave
adjustments or controller addressing
for these functions to operate.
• Reece does not accept responsibility
if these settings do not work
correctly on your particular system.
To Next Page
Loading...
