Daikin Myzone 3 - A;C Unit Configuration; Controlling Sensor

Myzone 3 12:00PM 01 Jan 2021
SYSTEM ZONES AC UNIT OPTIONS
Const Control
Unit Auto Off
Use In-duct Energy
Auto Mode Dead Band 1.50
AC Unit Make
Auto Detect AC Unit
Controlling Sensor Zones
Fan Auto
AC Unit Sensor
R/Air
Master
Zones
RF Sensor
87
A/C Unit
Configuration
Controlling Sensor
R/Air will control the A/C
using the unit's return air
sensor
Touch here to change the
controlling sensor
Master will control the A/C
unit from an assigned touch
screen or zone sensor
Zones will control the A/C
unit from the zone that's
actual temperature is
furthest from the desired
set temperature
RF Sensor is selected if you
are controlling an A/C unit
with no zones from a single
RF sensor. The RF sensor
dial must be set to (F) or (R)