Daikin Myzone 3 - In-Duct Energy

Myzone 3 12:00PM 01 Jan 2021
SYSTEM ZONES AC UNIT OPTIONS
Const Control
Unit Auto Off
Use In-duct Energy
Auto Mode Dead Band 1.50
AC Unit Make
Auto Detect AC Unit
Controlling Sensor Zones
Fan Auto
Use In-duct Energy
This option allows to use energy in the supply air
ductwork to fine tune the zone temperatures.
For example:
- Mode Cool - iZone will utilise warm air in the ductwork
to raise the temperature in zones which overshoot
(below setpoint).
- Mode Heat - iZone will utilise cool air in the ductwork
to drop the temperature in zones which overshoot
(above setpoint).
Use In-duct Energy
92
A/C Unit
Configuration
In-Duct Energy
Touch here to enable/disable the
use of In-Duct Energy