Daikin Myzone 3 - Unit Info and Master;Slave Setup

Auto Detect AC Unit
Panasonic
Fault History
AC Unit Setup
Unit Info
Back
Induct Energy
On/Off
Myzone Other
Mode
Fan
Setpoint
Master/Slave Settings
74
Unit Info and
Master/Slave Setup
Note:
• This is an Advanced setting and
should only be attempted by suitably
qualified Myzone technicians.
• These settings will only work with
certain makes and models of A/C
units. Contact Reece to check if your
system is suitable.
• The A/C system controls may require
additional PCML5Bs, master/slave
adjustments or controller addressing
for these functions to operate.
• Reece does not accept responsibility
if these settings do not work
correctly on your particular system.
Indicates what brand A/C
unit module is connected
to this system
Press here if you want to manually
search for the correct unit
System can be turned On/O by
both the Myzone and
"Other" controller
System On/O control
System mode control
System fan speed control
System set point adjustment
Touch here to view the fault
history for this A/C unit
System mode can be changed by
both Myzone and
"Other" controller
System fan speed can only
be controlled by the
Myzone Controller
System set point can only
be controlled by the "other"
controller connected to the unit
When this option is enabled
the Myzone will make use of
the temperature of the air in
the ductwork to try and move
the zones closer to set-point
regardless of the mode the
A/C unit is set to