RS-232/USB-COM PARAMETERS
Description Parameter Value
Disable Character
Host command character which dis-
ables the reader
R2DC b
Enable Character
Host command character which
enable
s the reader
R2EC b
ACK/NAK Options Disable
R2AE 00
Enable for label transmission
01
Enable for host command acknowl-
edge
02
Enable for label transmission and
host command acknowledge
03
ACK Character Selects character to be used as ACK
R2AC c
NAK Character Selects character to be used as NAK
R2NA c
ACK/NAK Timeout Value No timeout or from 200 to 15000 ms
R2AT d
ACK/NAK Retry Count From 0 to unlimited retries
R2AR e
ACK/NAK Error Handling Ignore errors detected
R2EH 00
Process errors as valid ACK character
01
Process errors as valid NAK charac-
ter
02
Beep On ASCII BEL Disable
R2BB 00
Enable
01
Beep On Not-On-File Disable
BPNF
00
Enable
01
Indicate Transmission
Failure
Disable
R2TF
00
Enable
01
Software Configuration Strings
208
Gryphon™ GPS4400
a = Hex value from 00 to 63 representing the decimal number (00 = no delay; all oth-
ers x10 ms)
b = Hex value from 00 to FE representing the ASCII character
c = Hex value from 00 to FF representing the ASCII character
d =Hex value from 00 to 4B representing the decimal number (00 = timeout disabled;
all others x200 ms)
e = Hex value from 00 to FF representing the number of retries (00 = no retries; 01-FE
= 1-254 retries; FF = unlimited retries)
Intercharacter Delay No delay or from 10 to 990 ms
R2IC a
To Next Page
Loading...
