Generating Label Formats 
 
Class Series 2 Programmer’s Manual  163 
 
<STX>L 
D11 
A2 
FA+ 
1911S0105000020P018P018DPL allows \<FP36FS36>FONT\<FS10FP10> sizes 
\<FS8FP12>in the string 
1911S0103500100P018P018\<FR80>D\<FR-5>P\<FR-5>L\<FR-5> \<FR-5>l\<FR-
5>e\<FR->t\<FR-5>s\<FR-5> \<FR-5>y\<FR-5>o\<FR-5>u\<FR-5> \<FR-5>w\<FR-
5>r\<FR-5>i\<FR-5>t\<FR-5>e\<FR-5> \<FR-5>i\<FR-5>n\<FR-5> \<FR-5>c\<FR-
5>i\<FR-5>r\<FR-5>c\<FR-5>l\<FR-5>e\<FR-5>s\<FR-5> \<FR-5>t\<FR-5>o\<FR-
5>o\<FR-5>! 
1911S0102400040P018P018\<FR+45>DPL allows \<FB+>Rotations\<FB-FR-90> in 
the string 
1911S0102000040P018P018DPL allows \<FB+>BOLD\<FB-> in the string 
FU+ 
1911S0101400040P018P012DPL allows \<FI+>ITALICS\<FI-> in the string 
FI+U- 
1911S0101000040P018P012DPL allows \<FB+I+>COMBINATIONS\<FB-I-> in the 
string 
FB+I- 
1911S0100600040P018P018DPL allows \<FB+>BOLD\<FB-> in the string 
FU+I+ 
1911S0100200040P018P018DPL allows \<FB+>BOLD\<FB-> in the string 
FB-U-I- 
E 
 
 
Figure 3 is an example of the output from this DPL command 
stream. The user has the ability to change the point and set 
size of the font within the DPL command record. In addition, 
the angle of the baseline may be specified relative to the 
current orientation of the record. (For example, the command 
\<FR+45> will rotate the baseline forty five degrees in the 
positive direction from the default print direction.) 
 
 
Refer to Section 8 for more information regarding the DPL 
record format for a scalable font text string.  
 
 
 
Figure 3