Datamax E-Class Mark II Programmer's Manual

Appendix G – Bar Code Details
Class Series 2 Programmer’s Manual 239
<STX>L
D11<CR>
1WM00000005000501139987520<CR>
E
Barcode W1M
Note that the human readable shows the format control code, sorting code and the
generated Reed Solomon error correction parity values.
Example 2:
The following example prints a Customer Bar Code 2 using a DPID of “32211324” and
customer information “A124B”:
<STX>L
D11<CR>
1Wm00000005001505932211324A124B<CR>
E
Barcode W1m
W1n / W1N: Industrial 2 of 5
Industrial 2 of 5 is a discrete, self-checking, continuous numeric bar code. All of the
information is contained in the bars, either wide or narrow, typically in a 3:1 ratio. The
space is equal to the width of the narrow bar.
Valid Characters: 0-9
Variable length, minimum one digit
Human Readable: W1N; and, Non-Human Readable: W1n
Example:
The following example prints an Industrial 2 of 5 with
a human readable field:
<STX>L
D11
1W1N8305001000100123456
E
Barcode W1N

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz