Datamax E-Class Mark II Programmer's Manual

Appendix G – Bar Code Details
Class Series 2 Programmer’s Manual 247
From the example, the bar code’s data stream,
1W1Z0000000150100001214000PDF<0x0D>417,
includes a Byte Count Specifier (the portion in bold), where 0012 equals the four-digit
decimal data byte count and includes all bytes that follow until the end of the bar code
data. Field termination is set by the byte count. <STX>, <CR>, and <0x0D> all represent
single byte values of hexadecimal 02, 0D, and 0D, respectively. The Micro PDF417 bar
code produced encodes “pdf<CR>417”, and prints a line of text: Barcode W1Z.

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz