Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
44 Class Series 2 Programmer’s Manual
Configuration Set Commands
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Alignment Length
AL
0 – 999 1/100 inch (18) N/A
Backup After Print
BA
Y, N
Y = Enabled,
N = Disabled
System Settings N/A
Backup Delay
BD
0 – 255 1/50 second System Settings N/A
Backup Label
BL
0, 3, 4
0 = Disabled,
3 = Active Low,
4 = Active High
Printer Options N/A
Backup (Reverse) Speed
BS or bS
alpha character
Model specific
ranges; see
Appendix L.
Print Control
pa
British Pound
BP
Y, N
Y = Enabled,
N = Disabled
N/A N/A
Buzzer Enable
BZ
Y, N
Y = Enabled,
N = Disabled
System Settings N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz