Dell EMC PowerEdge T340 DPJ1G - System Board Jumper Settings

Item Connector Description
8 INT_USB_3.0 Internal USB
9 Slot 4 PCIE_G3_X4 PCH PCIe card connector 4
10 T_INTRUSION Intrusion switch connector
11 SYS_FAN Fan
12 P2 CPU power connector P2
13 A1, A2, A3, A4 Memory module sockets
14 P1 System power P1
15 SATA 0-3 Mini SAS connector
16 SATA_ODD/SSD Optical disk drive connector
17 PWR_EVNT Power event
18 J_SATA_2 SATA connector 2
19 CPU Processor
20 NVRAM_CLR NVRAM password Jumper
21 TPM Trusted Platform Module connector
22 PWRD_EN Reset BIOS password jumper
23 IDSDM+ vFlash IDSDM+VFlash connector
24 Coin cell battery Coin cell battery
25 CTRL_PNL Control panel
System board jumper settings
For information on resetting the password jumper to disable a password, see the Disabling a forgotten password section.
Table 10. System board jumper settings
Jumper Setting Description
PWRD_EN The BIOS password feature is enabled.
The BIOS password feature is disabled. iDRAC local access is
unlocked at next AC power cycle. iDRAC password reset is enabled
in F2 iDRAC settings menu.
NVRAM_CLR The BIOS conguration settings are retained at system boot.
The BIOS conguration settings are cleared at system boot.
Jumpers and connectors 115