Figure 43. Installing the tape drive
Next steps
1 Install the front bezel.
2 Follow the procedure listed in After working inside your system.
Drive backplane
Drive backplane details
Your system supports the following backplane conguration:
• x8 SAS/SATA backplane for 3.5-inch drives
NOTE
: The x8 backplane also supports up to eight 2.5-inch (SAS, SATA, or SSD) hot swappable drives that can be installed in
3.5-inch drive adapters, which can be installed in the 3.5-inch drive carriers.
70 Installing and removing system components
To Next Page
Loading...
