Card
Priority
Category Card Type Form Factor Slot Priority Maximum
Allowed
14 NIC 1 Gb NICs Dual Port (Broadcom) Full Height 1,2,3,4 4
15 NIC 1 Gb NICs Quad Port (Intel) Full Height 1,2,4 3
Removing an expansion card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the air shroud.
4 Disconnect any cables connected to the expansion card.
Steps
1 If installed, disconnect the data cables from the PERC card.
2 Press the expansion card retention latch and push the latch downwards to open it.
Figure 56. Removing an expansion card
84
Installing and removing system components
To Next Page
Loading...
