Figure 72. Removing a redundant power supply unit
Next step
Install the PSU or PSU blank.
Installing a redundant AC power supply unit
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum output
power.
NOTE
: The maximum output power (shown in watts) is listed on the PSU label.
3 Remove the PSU blank.
Step
Slide the PSU into the system until the PSU is fully seated.
Installing and removing system components
99
To Next Page
Loading...
Need help?
General