CAUTION: To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a non-redundant
conguration. Remove the PSU blank only if you are installing a second PSU.
Figure 70. Removing the power supply unit blank
Next step
Install the PSU or PSU blank.
Installing the power supply unit blank
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
NOTE
: Install the power supply unit (PSU) blank only in the second PSU bay.
2 Remove the PSU.
Step
Align the PSU blank with the PSU slot and push it into the PSU slot until it clicks into place.
Installing and removing system components
97
To Next Page
Loading...
