152 Understanding the Tool Box Menus
Transfer Roller Refresh Mode
Purpose:
To execute counter measures for curling/separating discharge of the paper.
Va lu es :
Web Link Customization
Purpose:
To specify a link used for ordering consumables.
Va lu es :
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Va lu es :
Transfer Roller
Refresh Mode
Off Does not automatically execute counter measures for curling/separating discharge
of the paper.
On Automatically executes counter measures for curling/separating discharge of the
paper.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Select Reorder URL Select the Regular or Premier URL.
Regular Displays the regular web address
(http://accessories.us.dell.com/sna/PrinterSeg.aspx).
Premier Displays the premier web address (http://premier.dell.com).
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
IP Address Mode AutoIP Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Panel Manually sets the IP address.
IP Address Manually sets the IP address allocated to the printer.
Subnet Mask Manually sets the subnet mask.
Gateway Address Manually sets the gateway address.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.