Dell C1765nf Color Laser - Margin Middle

242 Copying
2 Press the (Copy) button.
3 Press the button until Margin Left/Right is highlighted, and then press the (Set) button.
4 Press the or button or enter the desired value using the numeric keypad, and then press the (Set)
button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
5 Press the (Start) button to begin copying.
Margin Middle
To specify the middle margin of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the (Copy) button.
3 Press the button until Margin Middle is highlighted, and then press the (Set) button.
4 Press the or button or enter the desired value using the numeric keypad, and then press the (Set)
button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
5 Press the (Start) button to begin copying.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch