Dell C1765nf Color Laser User Manual

342 Troubleshooting
Toner smears or print comes off/Stain on back side
Action Yes No
1 The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the Paper/Output tab in Printing Preferences of the printer
driver, change the Paper Type setting.
Is the problem recovered?
The task is complete. Go to action 2.
2 Verify that the correct print media is being used. See "Supported Paper
Types" on page 209. If not, use the print media recommended for the
printer.
Is the problem recovered?
The task is complete. Go to action 3.
3 Adjust the fusing unit temperature.
a Launch the Tool Box , and click Adjust Fusing Unit on the Printer
Maintenance tab.
b Adjust the fixing temperature by turning up the value for your
printing media.
c Click Apply New Settings .
d Click close box to exit Tool Box .
Is the problem recovered?
The task is complete. Contact Dell.

Dell C1765nf Color Laser Specifications

General

Print Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	30, 000 pages
Input Capacity	150 sheets
ADF Capacity	15 sheets
Functions	Print, Copy, Scan, Fax
Standard Memory	128 MB
Paper Handling Output	100 sheets
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Duplex Printing	Manual
Paper Capacity	150 sheets
Fax Transmission Speed	3 seconds per page
Print Technology	Laser
Media Sizes Supported	A4, Letter, Legal, Executive
First Page Out Time	27 seconds (color)
Maximum Paper Size	Legal (8.5 in x 14 in)
Operating System Compatibility	Windows, Mac OS