274 Faxing
3
Press the button to select the desired setting, and then press the
(Set)
button.
Lighter/Darker
To adjust the contrast to make the fax lighter or darker than the original:
1
Press the
(Fax)
button.
2
Press the button until
Lighter/Darker
is highlighted, and then press the
(Set)
button.
3
Press the or button to select the desired setting, and then press the
(Set)
button.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Sending a Fax Automatically
1
Load the document(s) face up with top edge in first into the ADF:
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2
Press the
(Fax)
button.
3
Adjust the document resolution to suit your fax needs. For more information, see "Resolution" on page 273.
If you need to change the contrast, see "Lighter/Darker" on page 274.
4
You can select a fax number in one of the following ways:
• Ensure that
Fax to
is highlighted, and then press the
(Set)
button. Press the button until
Phone
Book
is highlighted, and then press the
(Set)
button. Press the button to select the recipients.
•Press the
One Touch Dial
button.
•Press the
(Contacts)
button, select
All Entries
,
Group Dial
, or
Search
using the button,
and then press the
(Set)
button.
•Press the
(Redial/Pause)
button to redial.
•Press the
(Speed Dial)
button. Enter the speed dial number between 01 and 99 using the numeric
keypad, and then press the
(Set)
button.
Text Suitable for documents with text.
Photo Suitable for documents with photos.
Lighter2 Makes the fax lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the fax darker than the original. Works well with light print or faint pencil markings.
Darker2
All Entries Displays a list of registered fax numbers. Press the button to select the recipients.
Group Dial Press the button to select the recipients.
Search Searches a fax number from the Phone Book. Enter the text you want to search, and then press
the (Set) button. Press the button to select the recipients.
To Next Page
Loading...
Need help?
General
