Dell C1765nf Color Laser - Page 191

Understanding the Printer Menus 189
Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the defaults and return to the standby mode after you
do not specify any settings for the specified time.
Va lu es :
Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The print job is cancelled if it
times out.
Va lu es :
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is cancelled
if it times out.
Va lu es :
45sec*
1min
2min
3min
4min
Off Disables the fault time-out.
On* 60sec* Specifies the time taken by the printer before it cancels for jobs that stop abnormally.
Available Range:
3–300sec
Off Disables the job time-out.
On* 30sec* Specifies the amount of time that the printer waits for data to arrive from the computer.
Available Range:
5–300sec