Dell PowerEdge C6220 II - Embedded Network Devices

102 | Using the System Setup Program
Embedded Network Devices
Option
Description
Embedded NIC1
(Enabled with PXE default)
Disabled – Disables the system’s primary embedded
network interface controller.
Enabled with PXE – Enables the system’s primary
embedded network interface controller (full-function),
including its PXE boot-ROM.
Enabled without PXE – Enables the system’s primary
embedded network interface controller, but don’t
enable the NIC’s associated PXE or RPL boot-ROM.
iSCSI Remote Boot – Enables NIC1 with iSCSI
Remote Boot.