Dell PowerEdge C6220 II - POST Start Event

About Your System | 43
POST Start Event
Message: “System Event, POST starts with BIOS xx.xx.xx”
Byte
Field
Value
Description
1 NetFunLun 10h
2 Platform Event Command 02h
3 Generator ID 01h Generated by BIOS
4 Event Message
Format Version
04h Event Message Format
Revision. 04h for this
specification.
5 Sensor Type 12h System Event
6 Sensor Number 81h POST Start (depend on
platform)
7 Event Direction
Event Type
6Fh Bit 7: 0 = Assert Event
Bit 6: 0 = Event Type Code
8 Event Data1 AXh 01h: OEM System Boot Event
9 Event Data2 XXh 7~4: BIOS 1st Field Version
(0~15)
3~0: BIOS 2nd Field Version
higher 4bits (0~63)
10 Event Data3 XXh 7~6: BIOS 2nd Field Version
lower 2bits (0~63)
5~0: BIOS 3rd Field Version
(0~63)