Using the System Setup Program | 109
Indicates whether a supervisor password has been set.
If the password has been installed, Installed is
displayed. If not, Not Installed is displayed.
Indicates whether a supervisor password has been set.
If the password has been installed, Installed displays. If
not, Not Installed displays.
Change Supervisor Password
You can install a Supervisor password, and if you install
a supervisor password, you can then install a user
password. A user password does not provide access to
many of the features in the Setup utility. Note, the
Change User Password option only appears after a
Supervisor password has been set.
Select this option and press Enter to access the sub
menu, a dialog box appears which lets you enter a
password. You can enter no more than six letters or
numbers. Press Enter after you have typed in the
To Next Page
Loading...
