Dell PowerEdge C6220 II - Page 124

124 | Using the System Setup Program
Token
Setup option
Description
01CF
I/OAT DMA
Engine
Enables the I/O Acceleration Te chnology (I/OAT) DMA
Engine option. This feature should be enabled only if the
hardware and software support I/OAT.
01D0
I/OAT DMA
Engine
Disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be disabled only if the
hardware and software support I/OAT.
01DA Embedded NIC1 Enables NIC1 with iSCSI Remote Boot.
01DB
Embedded NIC2
Enables NIC2 with iSCSI Remote Boot.
01EA Tu rbo Mode Disables Intel's processor allows the processor core to
increase its frequency.
01EB Tu rbo Mode Enables Intel's processor allows the processor core to
increase its frequency.
01F0 Embedded NIC3
Disables the
system’s third embedded network interface
controller.
01F1 Embedded NIC3
Enables the system ’ s third embedded network interface
controller, but
don’t enable the NIC ’ s
associated PXE or
RPL boot-ROM.
01F2 Embedded NIC3
Enables the system ’ s third embedded network interface
controller (full-function), including its
PXE boot-ROM.
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
0204 VT for Direct I/O
Disables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when runn
ing a
Virtual Machine Monitor.
0205 VT for Direct I/O
Enables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when runn
ing
a Virtual Machine Monitor.
0211
Internal USB
PORT
This field disables the internal USB port.
0212
Internal USB
PORT
This field enables the internal USB port.
021F
Maximum
Performance
This will set the Maximum Performance mode in the
system.
0221 OS Control Allows OS to change the P-state.