Dell PowerEdge C6220 II - Page 81

Using the System Setup Program | 81
Chassis PSU Configuration
1 Enter the server BIOS setup screen.
2 Enter Advanced/Power Management/Chassis Power Management/
Chassis PSU Configuration, and the following options are for Chassis
PSU Configuration functions:
• Required Power Supplies -
Sets the number of power supplies that is required to run the
servers in the chassis.
• Redundant Power Supplies -
Sets the number of power supplies that is redundant.
The Boundaries of PSU Configuration:
PSU Number
Required PSU
Redundant PSU
2
2
0
1
1
1
1
0