Dell PowerEdge R660 - Page 195

Figure 165. Removing the expansion card riser (Riser 1)
2. For Riser 2 and Direct Liquid Cooling Riser 2, press the blue button on the riser, and holding the touch points lift the
expansion card riser from the riser connector on the system board.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 166. Removing the expansion card riser (Riser 2)
3. For Riser 3 and Direct Liquid Cooling Riser 3, press the blue button on the riser, and lift the expansion card riser from the
riser connector on the system board.
Installing and removing system components
195