Dell PowerEdge R660 - Optional BOSS-N1 module; Removing the BOSS-N1 module blank

Figure 186. Installing the M.2 NVMe SSD module
Next steps
1. Install the BOSS_N1 module.
2. Follow the procedure listed in the After working inside your system.
Optional BOSS-N1 module
Removing the BOSS-N1 module blank
Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Steps
1. Using a Phillips #1 screwdriver, remove the screw that secures the BOSS-N1 module bay to the chassis.
2. Remove the blank from the BOSS-N1 module bay.
210
Installing and removing system components