ASHRAE A4 environment for liquid cooling configuration
● 128 GB or greater capacity RDIMMs are not supported.
● Rear drives are not supported.
● 2.5 inch NVMe storage are not supported.
● BOSS N1 is not supported.
● GPU is not supported.
● Two power supplies are required. System performance may be reduced in the event of a PSU failure.
● Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
● OCP 3.0 card is not supported.
● 85°C (185°F) active optics cable is required.
ASHRAE A2 environment for EDSFF
● CPU > 300W are not supported .
● CPU > 270W with rear drive are not supported.
● Maximum 30°C (86°F) for CPU > 270 W storage configuration..
● Maximum 30°C (86°F) for CPU > 250 W with rear drive storage configuration.
● Maximum 30°C (86°F) for CPU > 185 W with 256G RDIMM .
● Maximum 30°C (86°F) for CPU > 150 W with 256G RDIMM in 2.5 rear drive configuration.
● CPU > 250 W are not supported in storage configuration.
● CPU > 225 W with rear drive are not supported .
ASHRAE A3 environment for EDSFF
● CPU > 205W are not supported.
● 128 GB or greater capacity RDIMMs are not supported.
● Rear drives are not supported.
● Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
● GPU is not supported.
● 85°C (185°F) active optics cable is required.
● Two power supplies are required. System performance may be reduced in the event of a PSU failure.
● CPU > 150 W are not supported in storage configuration.
● 128 GB or greater capacity RDIMMs are not supported.
ASHRAE A4 environment for EDSFF
● CPU > 150 W are not supported in storage configuration.
● CPU > 125W are not supported in storage configuration.
●
128 GB or greater capacity RDIMMs are not supported.
● Rear drives are not supported.
● BOSS N1 is not supported.
● GPU is not supported.
● Two power supplies are required. System performance may be reduced in the event of a PSU failure.
● Non Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
● OCP 3.0 card is not supported.
● 85°C (185°F) active optics cable is required.
42
Technical specifications