Table 39. BIOS Setup options—Update, Recovery menu(continued)
Update, Recovery
event of EC corruption, ME corruption, or a hardware issue. The recovery
image must exist on an unencrypted partition on the drive.
BIOS Downgrade
Allow BIOS Downgrade Controls flashing of the computer firmware to previous revisions.
By default, the Allow BIOS Downgrade option is enabled.
SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist OS Recovery tool in the event
of certain computer errors.
By default, the SupportAssist OS Recovery option is enabled.
BIOSConnect Enables or disables cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto OS Recovery Threshold setup option and local Service
operating system does not boot or is not installed.
By default, the BIOSConnect option is enabled.
Dell Auto OS Recovery Threshold Allows you to control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery Tool.
By default, the Dell Auto OS Recovery Threshold value is set to 2.
Table 40. BIOS Setup options—System Management menu
System Management
Service Tag Displays the Service Tag of the computer.
Asset Tag Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE: Once set in BIOS, the Asset Tag cannot be changed.
AC Behavior
Wake on AC Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
Wake on LAN Enables or disables the computer to turn on by a special LAN signal.
By default, the Wake on LAN option is disabled.
Auto On Time Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Intel AMT Capability Configure Intel Active Management Technology (AMT) options, which can be
enabled, disabled, or restricted.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
First Power On Date
Diagnostics Enable or disable the option for applications running in the operating system to
run with preboot diagnostics on subsequent boots.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
BIOS Setup 135
To Next Page
Loading...
