Table 40. System Setup options—Integrated Devices menu(continued)
Integrated Devices
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Unobtrusive Mode
Enable Unobtrusive Mode Enables or disables the unobtrusive mode. When enabled, all system LEDs, LCD
panel backlight and audio devices of the computer are turned off.
By default, the Enable Unobtrusive Mode option is disabled.
NOTE: On computers with collaboration touchpad, the Collaboration
Touchpad is disabled when the Enable Unobtrusive Mode option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 41. System Setup options—Storage menu
Storage
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD-1 and SSD-2 option is enabled.
SMART Reporting
Enable SMART Reporting Enables or disables the SMART reporting option.
By default, the Enable SMART Reporting option is disabled.
NOTE: To view this option, enable Advanced Setup mode as
described in View Advanced Setup options.
Drive Information Displays the information of onboard drives.
Enable MediaCard
Secure Digital (SD) Card Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
NOTE: To view this option, enable Advanced Setup mode as
described in View Advanced Setup options.
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
NOTE: To view this option, enable Advanced Setup mode as
described in View Advanced Setup options.
By default, the Secure Digital (SD) Card Read-Only Mode option is
disabled.
Table 42. System Setup options—Display menu
Display
Display Brightness
Brightness on battery power
By default, the screen brightness is set to 50 when the computer is running
on battery power. Set the screen brightness when the computer is running on
battery power.
136 BIOS Setup