Table 42. System Setup options—Display menu(continued)
Display
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Brightness on AC power By default, the screen brightness is set to 100 when the computer is running on
AC power. Set the screen brightness when the computer is running on AC power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Touchscreen Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
NOTE: Only available on computers with touch screen displays.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Full Screen Logo Enables or disables the computer to display full screen logo, if the image matches
screen resolution.
By default, the Full Screen Logo option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 43. System Setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Enables or disables the onboard LAN controller.
By default, the Integrated NIC option is set to
Enabled with PXE.
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and
controls the onboard LAN Controller.
By default, the Enable UEFI Network Stack option
is set to Auto Enabled.
NOTE: To view this option, enable Advanced
Setup mode as described in View Advanced
Setup options.
Wireless Radio Control
Control WLAN Radio Enable to sense the connection of the computer to a
wired network and then disables the selected WLAN
radio. Upon disconnection from the wired network,
the selected wireless radios are reenabled.
By default, the Control WLAN Radio option is
disabled.
BIOS Setup 137
To Next Page
Loading...
