Delta EtherCAT User Manual

Security of Software Protection EtherCAT Programming Guide
29-8 March, 2017
29
29.6 _ECAT_Security_Get_Check_UserPassword _State
 Syntax
U16 PASCAL _ECAT_Security_Get_Check_UserPassword_State (U16 CardNo, U16 *State )
 Purpose
Acquire the status of verifying the user password.
Note: The password check function cannot be done unless the the return code is not 2.
 Parameter
Name Data type Property Description
CardNo U16 Number Card No.
State U16*
Status
Return code:
0: Password check is done. User password is valid.
1: Verification failed. User password is invalid.
2: Verification in progress.
3: Please execute
_ECAT_Security_Check_UserPassword.
4: Processing error of
_ECAT_Security_Check_UserPassword

Example
U16 Status = 0;
U16 CardNo = 0, State = 0;
U32 UserPassword [8] = {0, 0, 0, 0, 0, 0, 0, 0};
// Check the user password.
Status= _ECAT_Security_Check_UserPassword( CardNo, UserPassword);
// Wait for the result.
While (1)
{
Status= _ECAT_Security_Get_Check_UserPassword_State ( CardNo, &State );
if (State != 2)
{
// Verification is done. Users can check the result from the return code.
break;
}
}

Delta EtherCAT Specifications

General

Brand	Delta
Model	EtherCAT
Category	Control Systems
Language	English