Denso BHT-1505B - FTP Download;Upload Messages

144
BHT-1500B series
FTP Download/Upload Messages
When the BHT is uploading or downloading files by FTP, the following messages will appear at the bottom
of the screen:
Aborted.
:
Uploading or downloading has been interrupted.
Connection error
:
The communication pathway is disconnected.
Device error
:
Failed to open a device.
Downloading
:
Downloading starts.
Download failed
:
Downloading has ended abnormally.
Download finished
:
Downloading has ended normally.
File broken!
:
The file being uploaded is corrupt.
File not found!
:
No file is found when downloading.
File not selected
:
No file has been selected.
File type mismatch! : When uploading, the attributes of the file selected in the SELECT FILE entry
box are different from those in the DIR/FILE entry box.
FTP error
:
An error has occurred during execution of an FTP command.
FTP opened
:
Connection has been established by FTP.
Illegal text format!
:
The format of the received text is illegal.
Opening device
:
Opening a device.
Out of memory!
:
The memory is insufficient for storing files to be downloaded.
Out of range!
:
The specified parameter(s) is out of the allowable range.
Parameter error! :
When downloading, the record length and/or field length specified in the
FIELDS entry box exceed 255.
Program file error!
:
The received program file is illegal.
Routing TCP/IP
:
Connecting to the TCP/IP communications pathway.
Syntax error!
:
A syntax error has occurred.
TCP/IP error
:
Failed to connect to the TCP/IP communication pathway.
TCP socket error
:
An error occurred in the TCP layer during execution of an FTP command.
Too many files! :
The current download will exceed the allowable number of files in the
memory.
Uploading
:
Uploading starts.
Upload failed
:
Uploading has ended abnormally.
Upload finished
:
Uploading has ended normally.