Denso BHT-1505B - Cloning the Backed up Data

62
BHT-1500B series
 3: CLONE: Cloning the backed up data
1. Select “3: CLONE” at the BACKUP menu and press the ENT key.
The following CLONE menu is displayed.
“1: EXECUTE”:
Clones the information specified by “2: BACKUP FOLDER”.
“2: BACKUP FOLDER”:
Selects the backed up information to be cloned.
“3: SW TO RESTORE”:
Selects the object to be cloned from the backup folder.
“4: FILE OPTION”:
Selects whether to remove the existing files at cloning.
2. Select “2: BACKUP FOLDER” at the CLONE menu and press the
ENT key.
The menu for the selection of clone informaiton is displayed. Use the
cursor keys ([▲] [▼]) to select the backup information to be cloned and
press the ENT key.
3. Select “3: S/W TO RESTORE” at the CLONE menu and press the
ENT key.
Use the cursor keys ([▲] [▼]) to highlight the item to be set, highlight the
setting value using the cursor keys ([◄] [►]) and press the ENT key.
“OS”: Selects whether or not to clone the OS.
“PARAM”: Selects whether or not to clone the OS settings.
“FILE”: Selects whether or not to clone the files.
4. Select “4: FILE OPTION” at the CLONE menu and press the ENT key.
Use the cursor keys ([▲] [▼]) to highlight the desired setting value and press the ENT key.
“DELETE” Removes the existing files at cloning.
“NOT DELETE” Does not remove the existing files at cloning.
5. Select “1: EXECUTE” at the CLONE menu and press the ENT key.
The screen on the right is displayed and cloning the information specified
by “2: BACKUP FOLDER” is started.
6. When cloning is complete, the Buzzer beeps once and the screen
on the right is displayed.
CLONE
1：EXECUTE
2：BACKUP FOLDER
XXXXXXXXXXXXXXXX
3：SW TO RESTORE
OS YES NO
PARAM YES NO
FILE YES NO
4：FILE OPTION
DELETE NOT DELETE
CLONE
** Working **
CLONE
** Completed **
CLONE
BACKUP PATH：
D：
∖
HT＿BKUP
SELECT FOLDER：
1/X
XXXXXXXXXXXXXXXX