Denso BHT-1505B - List of Possible Errors When Cloning

58
BHT-1500B series
When communication is complete, the screen will return to the CLONE MENU (the previous screen.)
In the event of a communication error, “Screen 2” below will appear.
Screen 1: Error occurrence Screen 2: Error/correctly completed
List of possible errors when cloning
Processing
Phase
Outline Displayed Message Operations Following Error
Directly After
Clone Start
BHT models are
different.
Different model on master side
(slave side).
Continue?
When screen 1 appears, select Yes/No.
Y: Continue processing (OS and OS
settings will not be copied.)
N: Suspend processing
OS update not
possible (when
HT-HT copy mode
designations, and
initialization are
required.)
OS cannot be updated.
Cloning will be stopped.
Screen 2 appears, and processing is
suspended.
Number of files
exceeded
Too many files.
Cloning will be stopped.
Memory capacity
exceeded
Insufficient memory on
slave side.
Cloning will be stopped.
When Clone is
Complete
OS settings cannot
be performed. (No
item/outside value
range.)
Some items could not be set on
slave side. (N items)
Screen 2 appears, and processing is
complete.
During
Communication
Communication error
Out of memory
File mismatch
Too many files
File error
Program file error
Communication error