163
7. Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight
[1: DO IT] and then press the ENT key.
A serial port connection is started.
Press and hold the BS/C key to return to the HID PORT MENU.
When the connection is established, the screen on the right is displayed.
Press the trigger key to read a barcode while the right menu is displayed.
The barcode reading data is displayed on the screen and is sent to the
connected device.
If any key is pressed, the key-data is displayed on the screen and is sent to
the connected device.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired menu and then press the
Enter key.
Press and hold the BS/C key to return to the HID PORT MENU.
Select [1: FILE] and press the ENT key.
Press and hold the BS/C key to return to the DOWNLOAD MENU.
If the HID port connection fails, the screen on the right is displayed.
Check the followings and retry the serial port connection.
The destination remote devices are in the vicinity.
The destination remote devices are ready for use.
The destination remote devices support the HID profile.
The sufficiently long timeout period is set.
HID PORT MENU
REMOTE BD_ADDR:
XXXXXXXXXXXX
REMOTE DEVICE NAME:
XXXXXXXXXXX
YYYYYYYYY
HID PORT MENU
** Connecting **
HID PORT MENU
**********************
* CONNECT ERROR *
**********************
To Next Page
Loading...
