Denso BHT-1505B - Page 236

224
BHT-1500B Series
Error No. Cause Details Remedy
The protocol specified at the BHT and PC
does not match.
Ensure that the protocol matches.
Please be aware that the default protocol differs
depending on the BHT used.
The PC communication port setting is illegal. Enable “Use FIFO buffer. (16550 interchangeable
UART required.) (U)” setting for the communication
port used.
Hardware malfunction
Please contact your dealer.
53
The protocol specified at the BHT and PC
does not match.
Ensure that the protocol matches.
Please be awa
re that the default protocol differs
depending on the BHT used.
55
The protocol specified at the BHT and PC
does not match.
Ensure that the protocol matches.
Please be aware that the default protocol differs
depending on the BHT used.
An attempt was mad
e to download a file
whose field width is different from that of the
data file that already exists in the BHT.
It is not possible to download a file with the same
name but different field width from the file already
existing in the BHT.
Either delete the existing data file in the BHT, or
specify the same field format as the existing data
file.
55
71
Illegal characters have been used in the file
name.
Change the file name.
Refer to QBdirect
for details of characters
applicable to file names.
75
The intended COM port number is already
used.
Use another COM port number or close the current
COM port.
The intended COM port number is missing.
Use the COM port number that is available.
91
Illegal field information specification option
when transmitting data file.
Set a correct value for the field information option.
An attempt was made to download a file with
field width differing from that of the data file
already existing in the BHT.
It is not possible to download a file with the same
name but different field width from the file already
existing in the BHT.
Either delete the existing data file in the BHT, or
specify the same field format as the existing data
file.
The size of the file being downloaded
exceeds the size of the available space in
the BHT user area.
Reduce the file size or delete any unwanted files in
the BHT.
Illegal characters have been used in the file
name.
Change the file name.
Refer to QBdirect for details of characters
applicable to file names.
Other
BHT-Ir/BHT protocol was used for transfer
for a BHT-
BASIC 4.0 format program file
(*.PD4).
Use Ymodem protocol or convert program files to
“*.PD3”.
An attempt was made to download a
BHT-BASIC 3.6 format program file (*.PD3).
Use BHT-BASIC 4.0 format program files (*.PD4).