Digi Connect IT 16 - Page 241

Virtual Private Networks (VPN) IPsec
Digi Connect IT® 16/48 User Guide
241
n RFC822/Email: The ID will be interpreted as an RFC822 (email address).
For RFC822 ID value, type the IDin internet email address format.
n FQDN: The ID will be interpreted as FQDN (Fully Qualified Domain Name) and
sent as an ID_FQDN IKE identity.
For FQDN ID value, type the IDas an FQDN.
n KeyID: The ID will be interpreted as a Key ID and sent as an ID_KEY_ID IKE
identity.
For KEYIDID value, type the key ID.
20. Click to expand Policies.
Policies define the network traffic that will be encapsulated by this tunnel.
a. Click  to create a new policy.
The new policy configuration is displayed.
b. Click to expand Local network.
c. For Type, select one of the following:
n Address: The address of a local network interface.
For Address, select the appropriate interface.
n Network: The subnet of a local network interface.
For Address, select the appropriate interface.
n Custom network: A user-defined network.
For Custom network, enter the IPv4 address and optional netmask. The keyword
any can also be used.
n Request a network: Requests a network from the remote peer.
d. For Remote network, enter the IP address and optional netmask of the remote network.
The keyword any can also be used. .