Digi Connect IT 16 User Manual

Diagnostics Configure options for the event and system logs
Digi Connect IT® 16/48 User Guide
671
-----------------------------------------------------------------------
--------
arping ARP ping
config Configuration
dhcpserver DHCP server
firmware Firmware
location Location
modem Modem
netmon Active recovery
network Network interfaces
openvpn OpenVPN
portal Captive portal
remote Remote control
restart Restart
serial Serial
sms SMS commands
speed Speed
stat Network statistics
user User
wol Wake-On-LAN
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the status interval, which
is the time interval between periodic status events. For example, to configure DHCP server
logging:
i. Use the question mark (?) to determine what events are available for DHCP server
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.
Parameters Current Value
-------------------------------------------------------------------
------------
info true Enable informational events
status true Enable status events
status_interval 30m Status interval
(config)> system log event dhcpserver

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English