Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1009
Syntax
modem firmware ota update [name STRING] [imei STRING] [version STRING]
Parameters
name: The configured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
version: Firmware version name.
modem firmware update
Update modem firmware using local firmware file. The modem will be updated to the firmware
specified in the /opt/[MODEM_MODEL]/Custom_Firmware/ directory unless a specific firmware version
is specified.
Syntax
modem firmware update [name STRING] [imei STRING] [version STRING]
Parameters
name: The configured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
version: Firmware version name.
modem pin change
Change the SIM's PIN code.
Warning: Attempting to use an incorrect PIN code may PUK lock the SIM.
Syntax
modem pin change <old-pin> <new-pin> [name STRING] [imei STRING]
Parameters
old-pin: The SIM's PIN code.
new-pin: The PIN code to change to.
name: The configured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
modem pin disable
Disable the PIN lock on the SIM card that is active in the modem.
Warning: Attempting to use an incorrect PIN code may PUK lock the SIM.
Syntax
modem pin disable <pin> [name STRING] [imei STRING]
Parameters
pin: The SIM's PIN code.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM