Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1028
Syntax
system serial save <port> <path>
Parameters
port: Serial port.
path: The path and filename to save captured traffic to. If a relative path is provided, /etc/config/serial
will be used as the root directory for the path and file.
system serial show
Displays the serial log on the screen.
Syntax
system serial show <port>
Parameters
port: Serial port.
system serial start
Start logging data on a serial port.
Syntax
system serial start <port> [size INTEGER]
Parameters
port: Serial port.
size: Maximum size of serial log. (Default: 65536)
system serial stop
Start logging data on a serial port.
Syntax
system serial stop <port>
Parameters
port: Serial port.
system support-report
Save a support report to a file and include with support requests.
Syntax
system support-report [path STRING]

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM