Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1018
Parameters
name: Display more details for a specific L2TP access concentrator.
show l2tp lns
Show L2TP network server status & statistics.
Syntax
show l2tp lns [name STRING]
Parameters
name: Display more details for a specific L2TP network server.
show l2tpeth
Show L2TPv3 ethernet tunnel session status and statistics.
Syntax
show l2tpeth [name STRING]
Parameters
name: Display more details for a specific L2TPv3 ethernet tunnel session.
show location
Show location information.
Syntax
show location [geofence]
Parameters
geofence: Show geofence information.
show log
Show system log (low level).
Syntax
show log [number INTEGER] [filter <critical|warning|debug|info>]
Parameters
number: Number of lines to retrieve from log. (Minimum: 1, Default: 20)
filter: Filters for type of log message displayed (critical, warning, info, debug). Note, filters from the
number of messages retrieved not the whole log (this can be very time consuming). If you require
more messages of the filtered type, increase the number of messages retrieved using 'number'.
show manufacture

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM