Services WANbonding
IX30 User Guide
519
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
WANbonding
Digi International Inc. offers a WAN bonding service as a licensed feature.
WAN bonding, a part of SDWAN (Software Defined Wide Area Networking), allows multiple internet
connections to be piped together to provide increased throughput. It also provides for assured data
delivery by duplicating packets inside the bonded tunnel to insure that latency and connection issues
on different internet connections do not result in dropped packets.
WAN bonding also provides seemless failover by automatically using multiple pips within the bonded
tunnel.
The WAN bonding service for your IX30 device must be enabled in Digi Remote Manager. Contact your
Digi sales representative for information.
Required configuration items
n
Enable the WAN bonding service.
n
Hostname of the external server hosting the WANbonding service.
n
The port on the external hosting server that will be used for the WAN bonding service.
n
The username and password to authenticate with the hosting service.
n
WAN interfaces that will be bonded.
n
The password used to authenticate with the web interface.
Additional configuration items
n
The firewall zone for the new bonded interface, if other than External.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI: