Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1016
show config
Show a summary of changes made to the default configuration. The changes shown are not suitable
for pasting into a CLI session.
Syntax
show config [cli_format]
Parameters
cli_format: Show the exact CLI commands required to configure the device from a default
configuration. The changes shown are suitable for pasting into a CLI session, although individual
output lines maybe context sensitive and unable to be entered in isolation.
show containers
Show container status & statistics.
Syntax
show containers [container STRING]
Parameters
container: Display more details and config data for a specific container.
show dhcp-lease
Show DHCP leases.
Syntax
show dhcp-lease [all] [verbose]
Parameters
all: Show all leases (active and inactive (not in etc/config/dhcp.*lease)).
verbose: Display more information (less concise, more detail).
show dns
Show DNS servers and associated domains.
Syntax
show dns
Parameters
None
show eth
Show ethernet status & statistics.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM