Digi IX30 User Manual

Command line interface Command line reference
IX30 User Guide
1026
Syntax
system firmware ota list
Parameters
None
system firmware ota update
Perform FOTA (firmware-over-the-air) update. The device will be updated to the latest firmware
version unless the version argument is used to specify the firmware version.
Syntax
system firmware ota update [version STRING]
Parameters
version: Firmware version name.
system firmware update
Update the current firmware image. Upon reboot the new firmware will be run.
Syntax
system firmware update <file>
Parameters
file: Firmware filename and path.
system power ignition off_delay
Update the current ignition off delay without changing the configuration.
Syntax
system power ignition off_delay <off_delay>
Parameters
off_delay: Ignition power off delay. Format: number{h|m|s}, Max: 18h. (Minimum: 0s, Maximum: 18h)
system restore
Restore the device's configuration from a backup archive or CLI commands file.
Syntax
system restore <path> [passphrase STRING]
Parameters
path: The path to the backup file.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM