Digi IX30 User Manual

Serial port Configure RealPort mode using the Digi Navigator
IX30 User Guide
256
Digi Navigator application features
All features of the Digi Navigator are available from the main application screen.
Item Description
1
Filters Click Filters to display the types of filters that can be applied to Digi
devices, services, and IP types.
n
Device Filters: A list of the Digi device types displays. All types
are disabled by default, and when all are disabled, all types are
displayed. To filter the devices by a certain type, click the bar to
display only the selected types. See Filter devices for display in
the Digi Navigator.
n
Services Filters: Not applicable for devices that do not support
autodiscovery with Digi Navigator.
n
Default IP Filters: Not applicable for devices that do not support
autodiscovery with Digi Navigator.
2
Digi Remote
Manager
Click Digi Remote Manager to launch Digi Remote Manager. See
Access Digi Remote Manager from the Digi Navigator.
3
Specify a
device
Expand the Specify a device section to enter the IPaddress of a Digi
device. See Configure RealPort on a Digi device from the Digi Navigator.
4
List of
discovered
devices
Not applicable for devices that do not support autodiscovery with Digi
Navigator.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM