Revision history—90002452
Revision Date Description
A May 2022
Initial release of the IX30 User Guide.
B June 2022
Release of Digi IX30 firmware version 22.5:
n
5G enhancements:
l
Added 5G slice support for configuring the slice
type for the 5G modems.
n
Added WAN Bonding as an add-on feature via Digi
Remote Manager for bonding multiple outbound
Internet connections together for increased maximum
throughput or data redundancy.
n
Surelink enhancements:
l
Enabled Surelink reset_modem action by default on
cellular interfaces and set fail count to three.
l
Updated Surelink reset_modem action to
automatically power cycle the modem in the event
that the modem fails to reset.
n
Serial port support enhancements:
l
Added serial PPP dial-in mode to handle AT-based
connection requests from a device connected to a
serial port and provide IPv4 networking to the
device.
l
Added suppport for Realport serial mode.
n
Added the ability to configure CPU performance and
power consumption.
n
Added cellular APN and cellular connection duration as
datapoints sent to Digi Remote Manager.
n
Wi-Fi scanner enhancements:
l
Added support for sending an HTTP or TCP stream
of results from the Wi-Fi scanner to one or more
remote servers.
n
SCEP enhancements:
l
New SCEP client settings and underlying
functionality to support connecting to additional
SCEP servers.
l
Added show scep Admin CLI command to show
the sync status, expiration dates, and additional
details of any configured SCEP clients.
n
VPN enhancements:
IX30 User Guide
2
To Next Page
Loading...
Need help?
General
